To Find Virgin Wifi Password is pretty simple. As long as you have gotten a hub, all you have to do is unbox your hub and check around it for your username and password. It doesn’t matter if you have a Hub 3 or Hub 4 Or a Super Hub 1 or 2. Since you just acquired the Hub, you would be able to find your password
Below are three steps and guidelines that you can use to find your Virgin Wifi Password
You can Look Under the hub
Gently pull out the card
Keep your Hub and user details safe
Browse Away
1. You can Look Under the Hub
After unboxing your hub, take it out carefully and place it on a flat surface for steadiness. Once you have been able to unbox successfully, you can turn your hub upside down and thereafter, find a small white sticker attached to the back of the hub. Be careful to not remove or scratch the sticker when unboxing your hub because the sticker contains your network user name and password which you would use to connect your devices to the Hub’s WiFi.
2. Gently pull out the card
The hub is shaped rectangularly in such a way that a card can be inserted at the base. So that the card doesn’t fall out, you have to gently remove the Hub from the box and immediately reach out to the card to avoid an error. The pull-out card can be located at the base of the hub. This pull-out card also contains your user details. It includes your network user name and also your password. Note that if you do not like the password on your pull-out card, you can change it after logging in to your account. However, for now, keep the password and network username safe.
3. Keep your Hub and user details Safe
You do not want to keep your Hub in a place that is dangerous or keep your card somewhere that could damage it. If you keep your hub on a wet surface or in a place that is rough and dusty, it could affect your network connection. Do not also keep your hub in the cupboard since it can block your wireless signal. You also want to keep your Hub and user details somewhere convenient and assessable like on top of the fridge or top of the shelf so that you can always reach out to them whenever you need them.
4. Browse Away
When you are done with these steps, you can start using your Virgin media account by plugging the cables into the Hub and then plugging it into the wall socket after which you pop the power cable into a nearby socket and switch it on. Ensure the Hub is switched on at the back and finally make use of your hub’s wifi username and password to connect your devices to the Hub’s WiFi.
How do I Change My Wifi Password
If you want to keep your wifi password safe from hackers or change it to something you can easily remember, all you have to do is to enter “192.168.0.1” into the address tab of your browser. You can use any browser as long as it works with your phone or laptop. After that, you should log in to see the settings page using the former password you were using, then you select admin and then change your password to something you will not have difficulty remembering, then you enter your former password and the new password and finally, you select the apply changes icon. Your password would have been changed by this stage so all you have to do is restart your computers or devices and reconnect to the hub using your new user details.
- What do I do if I forgot my Virgin Media Password
If that is the case, look for the reset button which should be located at the back of the router, and press it with a pen for 30 seconds. The password will reset to the original one listed at the bottom of the router that way.
- How do I hide my network name
Log in to your settings page and select Advanced settings > Wireless > Security, Set the (SSID) option to No for both 2.4GHz and 5Ghz, and apply changes
- What do I do if my Virgin Media Hub isn’t working
Do not panic. Just call the number on your Quick Start pack to place a complaint.
