The USB standard is a data transfer protocol used to provide power, data and control over the bus. This data can be transferred with a maximum bandwidth of 480 MB/s (Mega bit per second) and it has been utilized for more than two decades. The USB connector is usually rectangular with an “A” type shape that is inserted into the opening on the device and the corresponding slot on the other side.
The Plantronics Savi headset can be connected to a laptop or desktop computer using the USB cord. This wire will be used for both transmitting and receiving data. A USB port is typically located on the side of a PC, which will allow you to plug the cord into the back of your computer.
The Plantronics headset for PC is an audio device that connects to the computer. It has two options for connection, USB and wireless. To use the USB connection, plug the headset into any empty USB port on the computer. With the wireless option, use the included USB receiver plugged into any empty USB port, then press and hold down on the power button on the back of the receiver until you see “PLT BOOT” on screen.
We can connect Plantronics headsets to laptops. Plantronics offers wireless, over-the-ear headsets with Bluetooth connectivity. The USB plug connects to the computer while the headset is worn, and then it’s possible to hear the laptop’s audio through the microphone in the headset. A stereo or mono switch on the computer can be used to adjust which channel is reproduced.
Pairing a Plantronics Savi is a very easy process that can be completed in just a few steps. First, turn on your headset by pressing and holding the power button until the lights on the side of the headset turn solid green. Next, press the flashing power button on your phone three times to set up Bluetooth pairing mode. Finally, you will need to enter 0000 when prompted for a passcode. Your Plantronics Savi is now ready to use!
Plantronics headsets usually come with a cord that connects the headset to a phone. In order to connect your Plantronics headset to your office phone, first find the Plantronics cord and pull it from your headset. Connect the other end of the Plantronic cord to a corresponding jack on your office phone. This will allow you to talk on the phone using the Plantronics headset.
Pairing your Plantronics Savi Bluetooth, can be done in two ways. The first is to load the device with the compatible settings of your smartphone. This can be done by downloading the Plantronics app on your phone and following the instructions for pairing them both. The second option is to use the codes that are engraved on the back of the headset, which you will find under “Pair with” followed by a series of numbers.
